Knowledge base
1000 FAQs, 500 tutorials and explanatory videos. Here, there are only solutions!
Restore Windows with Acronis from Swiss Backup
This guide details how to restore a Windows-equipped computer using Swiss Backup the backup solution in an independent Swiss cloud.
Prerequisites
- Have a backup of the computer on Swiss Backup (refer to this other guide).
- Familiarize yourself with the Acronis documentation regarding the recovery of physical machines.
- The computer to be restored must be connected to the Internet via Ethernet cable (or WiFi depending on the computer's capabilities).
Restore the backup
To begin, from the computer in question or any other machine:
- Click here to access the Acronis Console with the credentials obtained after adding the device (need help?).
- Click on Devices in the left sidebar
- Click on the Restore button on your relevant backup plan
- Click on the other ways to restore at the top of the interface:
Browse through the backed-up files
If necessary, locally or remotely, you can first simply restore the files you need:
- Click on the Download files button (in the Browse Cloud Storage section).
- Open the relevant backup.
- Enter the encryption password if necessary.
- Browse the directory, select your files:
- Click on Download to obtain a
.zip
containing your selected files
Also, refer to this other guide.
Create a boot disk (on a USB key, for example)
To create a Windows boot disk and allow the restoration of a computer:
- Click on the button Download an ISO image (in the Restore an entire machine section).
- Write down the code in the form
AA11-BB22-CC33
that appears on the screen (more information): - Use software like Etcher to create a bootable disk from the downloaded
.iso
file.
Boot the computer from the removable media
Start the computer from this boot disk (by pressing the required key according to your machine: F1, F2, F10, F12, DEL, etc.) then follow the steps below:
- Click on Rescue Media:
- Connect the computer via Ethernet (or if necessary, configure the WiFi from the link located on the right side of the interface if the computer allows it) then click on Manage the device locally:
- Click on Restore:
- Click on Select data...
- Click the Browse button:
- Under Cloud Storage click on either:
- Log In and use the Acronis credentials (in the form
SBA-XXXX-ADMIN
) to authenticate (the keyboard is set to EN-US by default, make sure to type the word in plain text to verify if necessary): - OR Use the registration code if you have 2FA enabled, by following the proposed procedure (which involves requesting a temporary code (in the form ABCD-ABCD) and then going to the page
https://acronis.infomaniak.com/ui/#w=agentRegistration
to enter this code once logged into your Acronis account):
- Log In and use the Acronis credentials (in the form
- Click on your Acronis account ID and proceed to access the backups (the encryption password will be requested if it had been activated - see point 12 of this guide).
- Choose the workstation, the restore point and the volumes (disks) to restore:
Useful information:- Use the arrow to the left of the workstation names to display the backups…
- The first table at the top allows you to choose the workstation and the backup to restore…
- The second table allows you to choose the content (the disks) of the backup to restore…
- Click on OK to continue.
- Match the original and destination volumes:
Useful information:- For each volume or disk of the source backup, click on Required to choose where to restore the data.
- Under Restore Options, it is recommended to check the box Automatic Restart.
- Click on OK to start the restoration.
Link to this FAQ: